Electric System Reliability
Providing safe, dependable, affordable and efficient electric service to your home is our highest priority. That's why we regularly inspect and test our electric system, making corrections before power-quality problems arise.
We monitor the reliability of our electric system on a daily basis and develop projects to improve electric service reliability for our customers.
![Electric Reliability](/-/media/Project/PSE/Portal/ArticleImages/ArticleImage-ElectricReliability.jpg?rev=877e1cab3e2a46b1825cb0d08c0c7eef&modified=20231102210426&hash=0AC59229F95F24542B8C115257070F17)
-
Targeted reliability improvements
- Tree wire
Tree branch-related outages can be reduced by more than 95 percent when smaller diameter wire is replaced with tough, thick-coated wire designed to prevent outages when tree limbs fall into power lines. Tree wire cannot prevent outages caused by large falling trees. - Convert existing overhead lines to underground
After a careful analysis of all specific criteria relating to the reliability issue, we may determine that undergrounding the distribution lines is the best and most prudent solution. - Reclosers
By installing specialized equipment on power lines, the length and size of outages can be minimized. Reclosers sense a fault on a power line and automatically attempt to re-energize the line. If the recloser no longer senses the fault, it will reclose and re-energize the line without needing service personnel to deploy and physically patrol the line. - Supervisory Control and Data Acquisition
Supervisory Control and Data Acquisition (SCADA) is an important aspect of managing the power system. SCADA is a system used for monitoring and controlling equipment remotely that enables faster restoration of power to our customers.
- Tree wire
-
System-wide reliability improvements
- Vegetation management
Trees are beautiful and an important part of living in the Northwest, but they are a major cause of outages. To mitigate falling trees and limbs, we perform vegetation management on a cyclical schedule, with efforts focusing on achieving a safe and reliable electric system. - TreeWatch
Certified arborists work with communities and property owners to identify and remove “at-risk” trees on private property to prevent tree-related outages. - Wildlife protection
In an effort to avoid wildlife caused outages, special safety equipment is installed when maintenance activities occur to poles, transformers and high-voltage lines. - Underground cable replacement
Some underground electric cable installed up until the 1980s has reached the end of its useful life. Replacing this failing cable greatly reduces localized outages and increases reliability. - Pole inspection and replacement
Failure of utility poles can cause outages. To ensure the continued strength, safety and reliability of our utility poles, we regularly inspect wood poles and treat or replace them as needed. - Substation equipment replacement
Specific types of equipment are proactively replaced in substations annually. These include transmission and distribution breakers, transformer protection devices and circuit switches to maintain system reliability.
- Vegetation management
-
Current projects
- For more information on large improvement projects, visit thestudioentrance.com/projects.
- You can also locate projects in your area by visiting thestudioentrance.com/projectsmap.